Using The Kitchen Timer - Amana Radarange AMC5108AAB/W Owner's Manual

AMC5108AA_GB.fm Page 13 Thursday, March 11, 2004 9:50 AM
Operation
Setting Cooking Times & Power Levels, continued
Some recipes require different stages of cooking at different temperatures. You
can set up to two(2) stages of cooking when microwaving.
Multi-stage Cooking
1
Follow steps 1 and 2 in the "One-Stage Cooking" section on the
previous page.
When entering more than one cooking stage, the Power Level
button must be pressed before the second cooking stage can be
entered.
To set the power Level at High for a stage of cooking, press the
Power Level button twice.
2
Use the number buttons to set a second cooking time.
3
Press the Power Level button, then use the number buttons to
set the power level of the second stage of cooking.
4
Press Start to begin cooking.
You can check the Power Level while cooking is in progress by
pressing the Power Level button.

Using the Kitchen Timer

1
Press the Kitchen Timer button.
START ENTER TIME TIME2
2
Use the Number buttons to set the length of time you want the
timer to run.(max. time 99 min. 99 sec.)
START ENTER TIME TIME2
(If you do not press the Start button, after 5 seconds, the "Start"
indicator will blink.)
3
Press Start to begin Kitchen Timer.
4
The display counts down and beeps when the time has elapsed.
After preheating, press the Pause/Cancel button before baking.
Note : The microwave does not turn on when the Kitchen timer
is used.
13