Table of Contents
Advertisement
r Rotate the VOL/PWR
knob to set the volume
level. If no signal is
present, press and hold
in the MONITOR but-
ton (under the P T T
switch) more than 2
seconds; background
noise will now be
heard, and you may
use this to set the
VOL/PWR knob for
the desired audio level.
Press and hold the
MONITOR button more than 2 seconds (or press
the MONITOR button twice) to quiet the noise
and resume normal (quiet) monitoring.
r To transmit, press and
hold the PTT switch.
Speak into the micro-
phone area of the front
panel grille (above the
[ D ] key) in a normal
voice level. To return
to the Receive mode, release the PTT switch.
6
O
PERATION
r Press the Soft key (if assigned to the Scan func-
tion) or switch the TOGGLE Switch to the as-
signed "Scan" position (when so programmed by
your dealer) to start the scanner. The scanner rap-
idly steps through each of the dealer-programmed
channels, looking for incoming calls.
r Press the TOP SEL
key (on the top panel)
or SIDE SEL key (the
top button on the left
side) to activate one of
the preprogrammed
functions which may
have been enabled at
the time of program-
ming by the dealer.
Similarly, when using
the 16-key version, the
[ A ] , [ B ] , [ C ] , and [ D ]
function keys may ac-
tivate one of these features, if programmed by
the dealer. See the next section for details regard-
ing the available features.
VX-900 O
M
PERATING
ANUAL
Advertisement
Table of Contents
