Table of Contents
Advertisement
Description of Operating Functions
Channel Scan
The Scanning feature is used to monitor multiple
channels programmed into the transceiver. While
scanning, the transceiver will check each chan-
nel for the presence of a signal, and will stop on a
channel if a signal is present.
One key or switch may be assigned to the Scan
function, as follows:
r One of the Soft keys may be assigned for
Scan operation; or
r The TOGGLE switch may have one position
assigned to the Scan function.
To activate scanning:
¦ Press the assigned Soft key, or set the
TOGGLE switch to the assigned position.
¦ The scanner will search the channels, looking
for active ones; it will pause each time it finds
a channel on which someone is speaking.
To stop scanning:
¦ Press the assigned Soft key, or set the
TOGGLE switch to a different position.
¦ Operation will revert to the channel to which
the CH knob is set.
10
A
O
DVANCED
PERATION
Note: Your dealer may have programmed your
radio to stay on one of the following channels if
you press the PTT switch during scanning pause:
Dual Watch
The Dual Watch feature is similar to the Scan fea-
ture, except that only two channels are monitored:
r The current operating channel; and
r The "Priority" channel.
To activate Dual Watch:
¦ Press the assigned Soft key, or set the
¦ The scanner will search the two channels; it
To stop Dual Watch:
¦ Press the assigned Soft key, or set the
¦ Operation will revert to the channel to which
£ Current channel ("Talk Back")
£ "Last Busy" channel
£ "Priority" channel
£ "Home" channel
£ "Scan Start" channel
TOGGLE switch to the assigned position.
will pause each time it finds a channel on
which someone is speaking.
TOGGLE switch to a different position.
the CH knob is set.
VX-900 O
M
PERATING
ANUAL
Advertisement
Table of Contents
