Table of Contents
Advertisement
ing the Soft key. To restore a particular channel
to your scanning list, press and hold in the Soft
key again for one second; " - S T O P - " will appear
on the LCD for one second after pressing the Soft
key.
Call/Reset
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press the Dealer-assigned
Soft key, followed by the three digits represent-
ing the Page Call code of the station you wish to
call. Three tones will be heard after the last key
is pressed (the new code will now be transmit-
ted).
The receiver squelch of the other station will be
opened, and you can begin communication.
14
A
O
DVANCED
PERATION
Speed Dial
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the Dealer-assigned Soft
key for Speed Dialing, then press the numbered
key corresponding to the Auto-Dial memory num-
ber list provided by your Dealer. The DTMF tones
sent during the dialing sequence will be heard in
the speaker.
Emergency
The VX-900 includes an "Emergency" feature
which may be useful if you have someone moni-
toring on the same frequency as your transceiver's
channel. For further details contact your VER-
TEX STANDARD dealer.
VX-900 O
M
PERATING
ANUAL
Advertisement
Table of Contents
