Storage; Storage Preparation; Cleaning - Honda WT40 Owner's Manual

STORAGE

STORAGE PREPARATION

Proper storage preparation is essential for keeping your pump
trouble-free and looking good. The following steps will help to keep rust and
corrosion from impairing your pump's function and appearance, and will make
the engine easier to start when you use the pump again.

Cleaning

1. Wash the engine and pump.
Wash the engine by hand, and be careful to prevent water from entering the
air cleaner or muffler opening. Keep water away from controls and all other
places that are difficult to dry, as water promotes rust.
• Using a garden hose or pressure washing equipment can force water into the
air cleaner or muffler opening. Water in the air cleaner will soak the air filter,
and water that passes through the air filter or muffler can enter the cylinder,
causing damage.
• Water contacting a hot engine can cause damage. If the engine has been
running, allow it to cool for at least half an hour before washing.
2. Wipe dry all accessible surfaces.
3. Fill the pump chamber with clean, fresh water, start the engine outdoors, and
let it run until it reaches normal operating temperature to evaporate any
external water.
Dry operation will damage the pump seal. Be sure the pump chamber is filled
with water before starting the engine.
42