Table of Contents
Advertisement
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
17.7 Clean the water inlet fil-
ters.
Emptying the water inlet hose
Turn off the tap.
1.
Set a programme, except for
2.
Spin or a draining pro-
Rinse,
gramme.
Start the programme and leave it
3.
to run for approx. 40 seconds.
Switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
Cleaning the filter on the tap
Note: Please read the information in
the sections on Safety → Page 4 and
Preventing material damage
→ Page 11.
Requirement: The water inlet hose is
empty.
Remove the water inlet hose from
1.
the tap.
Clean the filter with a small brush.
2.
Connect the water inlet hose and
3.
check for leaks.
Cleaning the filter on the
appliance
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Cleaning and servicing en
51
Advertisement
Table of Contents
