Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Bosch WAL28PHVZA User Manual And Installation Instructions

Soiling
Water hardness: Hard/very
hard
The dosages can be found on the
manufacturer's packaging.
¡ Adjust the dosage to the actual
load.

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 13
Press .
▶
The switch-on process takes a few
seconds.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 26
If necessary, adjust the pro-
2.
gramme settings → Page 39.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 39
Adjust the programme settings.
▶
→ "Buttons", Page 24
Light
55 ml
Observe the information about op-
erating logic.
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
Press and hold
▶
seconds.
Press
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 11.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 26.
Requirement: The laundry is pre-
pared.
→ "Laundry", Page 36
Open the door.
1.
Make sure that the drum is empty.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
Basic operation en
Normal
80 ml
settings
for approx. 3
to call up the saved pro-
Heavy
105 ml
39