Spark Plug; Cooling System - Echo SRM-2620T Operator's Manual

SRM-2620T
1. Use a clean rag to remove
loose dirt from around fuel cap
and empty fuel tank.
2. Pull the fuel filter from the fuel
tank.
3. Remove the filter from the line
and install the new filter.
Note: Federal EPA regulations
require all model year
2012 and later gasoline
powered engines
produced for sale in the
United States to be
equipped with a special low permeation fuel supply hose
between the carburetor and fuel tank. When servicing model
year 2012 and later equipment, only fuel supply hoses certified
by EPA can be used to replace the original equipment supply
hose. Fines up to $37,500 may be enforced for using an un-
certified replacement part.

Spark Plug

Level 2.
Parts Required:
Use only NGK CMR7H spark plug otherwise severe engine damage
may occur.
1. Remove spark plug and check
for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with
a new one. DO NOT sand
blast to clean. Remaining sand
will damage engine.
3. Adjust spark plug gap by
bending outer electrode.
4. Tighten spark plug to 102-153
kgf•cm (89-133 in•lbf).

Cooling System

Level 2.
X7502341000
© 1/2016 ECHO Inc.
TM
REPOWER Tune-Up Kit
MAINTENANCE
0.6 mm (0.026 in.)
31