Specifications; Instructions For Putting Into Use; Serious Injury - Harbor Freight Tools 99780 Set Up And Operating Instructions Manual

electrically malfunction or break
down, grounding provides a low
resistance path to carry electricity
away from the user, reducing the risk
of electric shock. (see 3-prong plug
and Outlet.)
2. The grounding prong in the plug is
connected through the green wire in-
side the cord to the grounding system
in the tool. The green wire in the cord
must be the only wire connected to
the tool's grounding system and must
never be attached to an electrically
"live" terminal. (see 3-prong plug
and Outlet.)
3. The tool must be plugged into an
appropriate outlet, properly installed
and grounded in accordance with all
codes and ordinances. The plug and
outlet should look like those in the
preceding illustration. (see 3-prong
plug and Outlet.)
symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
a
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
SKU 99780-81 For technical questions, please call 1-800-444-3353.

speciFicatiOns

Electrical Requirements 120 V~ / 60 Hz / 9.3 A
Air Hose Connection
Maximum Air Pressure
Air Pressure Cut On
Air Tank Capacity
Air Flow Capacity
Motor
unpacKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
instructiOns FOr
putting intO use
read the entire impOrtant
saFetY inFOrmatiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
FrOm accidental
OperatiOn:
turn the power switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
1/4" 18 NPT
155 PSI
125 PSI
sku 99780: 17 Gallons
sku 99781: 26 Gallons
6 SCFM @ 40 PSI
4 SCFM @ 90 PSI
4 HP, 13000 RPM
233060
tO preVent

seriOus injurY

Page 6