Central pneumatic air compressor air compressor user manual (14 pages)
Summary of Contents for Harbor Freight Tools Central Pneumatic 65410
Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
SKU 65410 For technical questions, please call 1-800-444-3353. noTice is used to address practices not related to personal injury. cauTion, without...
Page 3
SKU 65410 For technical questions, please call 1-800-444-3353. This enables better control of the tool in unexpected situations. dress properly. do not wear loose clothing or jewelry.
Industrial applications must follow OSHA requirements. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Prepare to begin work before turning on the tool.
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 65410 For technical questions, please call 1-800-444-3353. saVe THese insTrucTions. grounding...
Page 6
(see 3-Prong Plug and outlet.) symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) SKU 65410 For technical questions, please call 1-800-444-3353. Page 6...
SKU 65410 For technical questions, please call 1-800-444-3353. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Make sure the air tool’s throttle or switch is in the off position. Connect the tool that will be used for the job to the airline. SKU 65410 For technical questions, please call 1-800-444-3353. Close the in-line safety valve be- tween the compressor and the tool.
Page 9
Tank two turns to release any built-up moisture. Close the valve after moisture has drained out. Do not remove the Drain Valve. SKU 65410 For technical questions, please call 1-800-444-3353. drain Valve Disconnect the air hose and tool.
Pressure gauge worn or gauge reading damaged. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect air supply before service. SKU 65410 For technical questions, please call 1-800-444-3353. Troubleshooting likely solutions Move the compressor to an area with better air circulation.
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 65410 For technical questions, please call 1-800-444-3353. ParTs lisT...
(90 days if used by a professional contractor or if used as rental equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of ninety days from date of purchase, that all other parts and components of the product are free from defects in materials and workmanship.