Additional Programme; Settings; G Speed; F Eco - Bosch WAE20167ZA Series Instruction Manual And Installation Instruction

\

Additional programme

settings

i o n a l A d d i t m m e p r o g r a

G Speed*

For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Do not exceed the maximum
Note:
load.
Overview of programmes ~ Page 12

F Eco*

For saving energy with a washing result
comparable to that of the standard
programme.
The washing temperature is
Note:
lower than the selected temperature.
For special hygiene requirements, we
recommend selecting a higher
temperature or the G Speed option.
p Easy-Iron
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.

O Rinse plus*

Extra rinse. For areas with very soft
water or to further improve the rinsing
result.

Z Water plus*

Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or to further
improve the rinsing result.
(* depending on model)
i n g s s e t t
Additional programme settings
1
Operating the
appliance
i n g O p e r a t
Preparing the washing
machine
The washing machine must be
Note:
correctly installed and connected
(from ~ Page 28).
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be
rotated in both directions.
The machine is switched on.
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
All buttons are sensitive and only
Note:
need to be touched lightly. If the buttons
are held for longer, the appliance
automatically runs through the setting
options.
t h e
en
a n c e a p p l i
15