Napa Carlyle TW38RH2 Manual page 4

REPLACING THE HEAD KIT (CONT.)
Step 2: Apply grease on the drive, where shown. (Fig. 2)
Step 3: Place the pawl with heart spring on the drive.
(Fig. 3)
Step 4: Place the drive spring in the screw hole on the
driver. (See Fig. 4). Then place the assembled drive in the
ratchet head as shown in Fig. 5.
TW38RH2, TW12RH1, TW34
Fig. 2
Fig. 3
Fig. 4
Fig. 5
4 Rev. 02/27/15