When Setup Fails - Epson EB-1460Ui Installation Manual

Appendix

When Setup Fails

Check
Are the lamp indicator and the tempera-
ture indicator flashing orange quickly?
Are the power indicator and the status in-
dicator flashing blue quickly, and the lamp
indicator and the temperature indicator
flashing orange quickly?
The batch setup file may be corrupt, or the USB flash drive may not
be connected correctly. Disconnect the USB flash drive, unplug and
then plug in the projector's power cord, and then try again.
Writing the settings may have failed and an error may have occurred
in the projector's firmware. Stop using the projector, remove the
power plug from the electrical outlet, and contact Epson for help.
112
Remedy