Setting The Projectors In Sync - Epson EB-1460Ui Installation Manual

Appendix

Setting the projectors in sync

When using the interactive function for multi-projection, interactive pen operations become unstable due
to infrared interference. Follow the steps below to stabilize operations for the interactive pen. Check that
installation is complete for both projectors before making settings.
"Installing the Setting Plate"
s
a
Connect the SYNC ports for each projector by using the optional remote control cable set
(ELPKC28)
When the projectors are connected by cable, operations for the interactive pen stabilize.
The SYNC port has an IN and OUT socket. When you connect one end of the remote control cable set
to an IN socket, connect the other end to an OUT socket.
b
Turn on the projector, and then press the [Menu] button
Using the Remote Control
c
Select Easy Interactive Function from Extended
p.32
In
Using the Control Panel
100
Out