Sanyo PLC-XM80 Owner's Manual page 62

Setting
Filter counter
This function is used to set a frequency for the filter cartridge
replacement.
Use the Point buttons to select Filter counter and then press
pq
the Point or the SELECT button to access the submenu items.
u
Filter counter......
Timer ................
Filter counter reset...When replacing the Filter cartridge, reset the
Fig .1 Filter warning icon
Filter warning icon appears on the screen at a
set time.
Test pattern
Various test pattern are available for use when setting up the
projector.
Factory default
This function returns all setting values except for User logo,
PIN code lock, Logo PIN code lock, Lamp counter, and Filter
counter to the factory default settings.
6
Show the total accumulated time of the filter
cartridge.
To set a timer, when the projector reaches
the time, the Filter warning icon (Fig. 1)
appears on the screen and the total
accumulated time turns red, indicating that
the filter cartridge replacement is necessary.
Filter counter (p.65).
Filter counter
Press the SELECT button to select Timer and then use
the Point buttons to set the timer. Select from (Off/
pq
600H/900H/100H/1500H/1800H/000H) depending on
the use environment.
P Note:
• Fig.1 appears at turning on and selecting input
source.
• Fig.1 will not appear when the Display function is
set to Off (p.52), during "Freeze" (p.30) or No show
(p 29).