Table of Contents
Advertisement
Computer Input
Keystone
This function is used to adjust keystone distortion of the projected
image. Use the Point pq buttons to choose the item you want to
adjust.
t Keystone correction
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point pq buttons to
correct keystone distortion (p.31).
t Store or Reset
To store or reset the keystone correction, press the Point u
button.
Store ....... Keep the keystone correction even when the AC
power cord is unplugged.
Reset ...... Release the keystone correction when the AC
power cord is unplugged.
Ceiling
When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.
Reset
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at "Yes."
44
Keystone
Ceiling
Rear
Advertisement
Table of Contents
