Table of Contents
Advertisement
22. Transferring files between the Primebook and other
devices
Transferring files via Bluetooth
a)
Enable the Bluetooth function on the device you want to connect and make
the device visible to other devices if necessary. To do so, refer to the operating
instructions of the device to be connected.
b)
Call up the settings (see Section 16).
c)
In Settings, tap "Devices" and in the following window tap "Bluetooth &
other devices" on the left.
d)
Drag the Bluetooth slider (in the centre of the screen) with from left
to right. The word "On" appears next to the slider. This activates the
Primebook Bluetooth function.
e)
Tap "Add Bluetooth ot other device" and than choose "Bluetooth".
The Primebook searches for available devices nearby.
f)
Select the device you want to connect from the list of devices available by
tapping the name of the device.
g)
The Primebook sends a verification code to the device to be connected.
Check that the code displayed on the device to be connected matches the
code displayed on the Primebook and confirm on the notebook by tapping "Yes".
i
ADVICE
You may also have to confirm the pairing procedure on the device to be
connected.
h)
The status message "Paired" appears after successful pairing. Close this
window by tapping on "Close".
i)
Exit the device settings by closing the window. To do this, click the "x"
symbol at the top right of the display.
j)
Open the file browser by tapping the folder symbol on the task bar and go
to the file that you would like to send.
k)
Set a check mark to the file to be sent. Click the right mouse button, the
context menu opens.
l)
Tap "Send to" on the context menu and then tap "Bluetooth device". A
list of all paired Bluetooth devices appears.
m)
Tap the required device and confirm with "Next". The notebook now sends
the selected file to the required device.
n)
You may have to confirm receipt of the file on the destination device.
28
Advertisement
Table of Contents
