Table of Contents
Advertisement
22. Transferring files between the Surfbook and other devices
Transferring files via Bluetooth
a)
Enable the Bluetooth function on the device you want to connect and
make the device visible to other devices if necessary. To do so, refer to the
operating instructions of the device to be connected.
b)
Call up the settings (see Section 16).
c)
In Settings, tap "Devices" and in the following window click "Bluetooth &
other devices" on the left.
d)
Drag the Bluetooth slider (in the centre of the screen) with from left
to right. The word "On" appears next to the slider. This activates the
Surfbook Bluetooth function.
e)
Tap "Add Bluetooth or other device" and than choose "Bluetooth".
The Surfbook searches for available devices nearby.
f)
Select the device you want to connect from the list of devices available by
clicking on the name of the device.
g)
The Surfbook sends a verification code to the device to be connected.
Check that the code displayed on the device to be connected matches the
code displayed on the Surfbook and confirm on the notebook by tapping "Yes".
ADVICE
i
You may also have to confirm the pairing procedure on the device to be
connected.
h)
The status message "Paired" appears after successful pairing. Close this
window by clicking on "Close".
i)
Exit the device settings by closing the window. To do this, click the "x"
symbol at the top right of the display.
j)
Open the file browser by clicking the folder symbol on the task bar and go
to the file that you would like to send.
k)
Click the right mouse button, the context menu opens.
l)
Click "Send to" on the context menu and then tap "Bluetooth device". A
list of all paired Bluetooth devices appears.
m)
Click the required device and confirm with "Next". The notebook now
sends the selected file to the required device.
n)
You may have to confirm receipt of the file on the destination device.
27
Advertisement
Table of Contents
