Table of Contents
Advertisement
MX-810i O
Power Remaining and Battery Warning Settings
On this screen, you can see how much battery charge remains and you
can reset the "Low Battery" warning to either 10, 20 or 30 percent. The
battery indicator at the top left of the MX-810i screen will flash when
your low battery warning level is reached.
System Info
See how much memory you've used on this screen.
Setting the Button Beep Volume
Use the buttons next to OFF and LOUDEST to adjust how loud the beeps
are.
M
WNERS
ANUAL
Note the current remaining battery charge here.
Use the LESS and MORE buttons to set the battery
warning.
Press the SAVE button to save your setting.
You cannot make any changes to the data displayed
on this screen. It is informational only.
Press the OK button to exit.
Use the OFF and LOUDEST buttons to set the Beep
volume.
Press the SAVE button to save your setting.
Page 11
MX-810i O
Date and Time Menus
Via the three menus for Date and Time you can set the date, set the time
and opt to display either the date or the time.
Setting Time
Tap the button beside hour or minutes then use the number keys to enter
the correct time. Set the AM/PM by toggling the button. When the time is
correct, press the SAVE button.
Setting Date
Tap the button beside day, month or year then use the number keys to
enter the correct date. When the date is correct, press the SAVE button.
Setting Display for Time or Date
The MX-810i can display either the time or the date, not both. Select what
you would like to be displayed and press SAVE.
M
WNERS
ANUAL
Select the field you'd like to change, then use the
Number buttons on the MX-810i to enter hours or
minutes.
Press this button to change AM to PM or PM to AM.
Each press changes the setting. When it is correct,
press SAVE.
Press the SAVE button to save your setting.
Select the field you'd like to change, then use the
Number buttons on the MX-810i to enter the year,
the month and the day.
Press the SAVE button to save your setting.
Select either Time or Date display.
Press the SAVE button to save your setting.
Page 12
Advertisement
Table of Contents
