Table 8-3 Thermo Label For Temperature - Mitsubishi S6R2 Operation & Maintenance Manual

Thermo Label - Handle
The white thermal part of thermo label becomes black when reaching the specified value.
Note: The thermal part that becomes black once does not return to white. Therefore, if the engine stops and then the
temperature of damper drops, the thermo label continues indicating the maximum temperature while engine is
running.
1. Attach a thermo label to the periphery or front end of damper.
2. Note the maximum temperature to check the thermal part of thermo label when engine stops. Note the temper-
ature periodically, and check the abnormality of temperature alteration.
Note: (a) When the temperature of thermo label increased, identify the abnormality of engine or other cause. Then,
reattach new thermo label, and check the change of temperature.
(b) If the temperature indication of thermo label comes close to the limit temperature of damper or the abnor-
mality is found in change of temperature, contact a dealer of Mitsubishi Heavy Industries, Ltd.
(c) For damper temperature limit and inspection, refer to
Table 8-3 Thermo Label for Temperature Management
Part
Part No.
Name
Thermo
32522-04211
label
20 labels set: 32522-04200
100-120
Thermo
32522-04111
label
20 labels set: 32522-04100
75-95
Thermo
32522-04311
label
20 labels set: 32522-04300
50-70
Chapter 8 PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
"Damper - Inspect"
Temperature
measuring
range
100 to 120°C
[212 to 248°F]
75 to 95°C
[167 to 203°F]
50 to 70°C
[122 to 158°F]
(8-4).
Fig. 8-3 Damper Temperature Management
Thermo label
<5E-100>
100 105 110 115 120
<5E-75>
7 5 8 0 8 5 9 0 9 5
<5E-50>
5 0 5 5 6 0 6 5 7 0
8-5