Installation Instructions; Selecting The Location; Attaching The Magellan Roadmate Receiver To The Car Cradle; Attaching The Car Cradle To The Car Mount - Magellan RoadMate N393M Series User Manual

Installation of the Magellan RoadMate receiver is simple and easy. The
hardest part will be picking the best location.

Selecting the Location

A few tips on selecting the proper location.
Mount the Magellan RoadMate receiver in a place where it can be easily

seen and will not interfere with your view of the road.
The Magellan RoadMate receiver should be mounted in such a way that

the antenna, (located in the top of the receiver), has an unobstructed view
of the sky through the windshield.
Make sure that the Magellan RoadMate receiver or any cabling will not be

disturbed if the airbags are activated.
Be sure to check your local and regional laws before mounting to the

windshield. Some states have laws restricting the mounting of any device
on the windshield.

Attaching the Magellan RoadMate receiver to the Car Cradle

Attach the bottom of the Magellan RoadMate receiver to the bottom edge of
the car cradle, and then push to fully mount the receiver to the car cradle.

Attaching the Car Cradle to the Car Mount

Attach the car cradle to the car mount.

Attaching the Power Cable to the Car Cradle

Attach the USB connector to the cradle. The USB connector will 'snap' in place
when it is fully seated in the car cradle.

Installation Instructions

11