Rear - Epson EH-TW5950 User Manual

Introduction

Rear

Name
a Speaker
b Power inlet
c Remote receiver
d RS-232C port
e PC port
f Component port
g Audio (L-R) port
h Video port
i USB port
j Cable holder
k HDMI2 port
l HDMI1 port
The projector's built-in speaker. Outputs audio.
Set Inverse Audio to On to use the built-in speaker when the projector is
suspended from a ceiling.
Connects the power cable.
Receives signals from the remote control.
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
p.98
s
Connects to the RGB output port on a computer.
Connects to the component (YCbCr or YPbPr) output port on video equip-
ment. p.18
s
Inputs audio from equipment connected to the Video port, Component port,
or the PC port. p.18
s
Connects to the composite video output port on video equipment.
Connects USB devices such as a USB memory device or a digital camera, and
projects images as a slideshow.
Thick HDMI cables with a large outer diameter and so on, may disconnect
easily due to the weight of the cable. To prevent the cable from disconnecting,
fix it in place using the HDMI cable clamp supplied.
Connects HDMI compatible video equipment and computers.
13
Function
Settings - Audio - Inverse Audio
s
p.22
s
p.21
s
s
p.19
s
p.71
p.19
p.18
s
p.20
s
p.18
s