Transmitting; Receiving - Kenwood NX-5200E User Manual

TRANSMITTING

1 Select the desired zone and channel using the Selector
knob and the [Zone Up]/ [Zone Down] or [Channel Up]/
[Channel Down] keys.
2 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
• The LED indicator lights red while transmitting and
receiving a signal. This indicator can also be disabled by
your dealer.
• For best sound quality at the receiving station, hold the
microphone approximately 3 cm to 4 cm (1.5 inches) from your
mouth.

RECEIVING

Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only
if the received signal matches your transceiver settings.
24
green while