Panasonic Lumix DMC-FZ60 Operating Instructions For Advanced Features page 58

[LCD Display]/
[Viewfinder]
•
It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder when the
viewfinder is in use.
•
Some subjects may appear differently from actuality on the LCD monitor/viewfinder. However, this
does not affect the recorded pictures.
[LCD Mode]
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects may
appear differently from actuality on the LCD monitor. However, this does not affect the recorded
pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording in
Power LCD Mode. Press any button to make the LCD monitor bright again.
•
When [LCD Mode] is set, the usage time is reduced.
[EVF Disp.Style]
•
Refer to P69 for details.
Brightness, colour, or red or blue tint of the LCD monitor/viewfinder is
adjusted.
[Brightness]:
Adjust the brightness.
[Contrast · Saturation]:
Adjust the contrast or clarity of colours.
[Red Tint]:
Adjust the red tint.
[Blue Tint]:
Adjust the blue tint.
1
Select the settings by pressing 3/4, and adjust with 2/1.
2
Press [MENU/SET] to set.
These menu settings make it easier to see the LCD monitor when you
are in bright places.
„ [Auto Power LCD]
The brightness is adjusted automatically depending on how bright it is
around the camera.
... [Power LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
[OFF]
Can be set only when
¢
This will set the display style of the Viewfinder.
[ ]: Viewfinder style
[ ]: LCD monitor style
Basic
¢
:
Mode is set.
Recording
- 58 -