12
en | Installation
5
Installation
5.1
Preparation
To separate the different parts of the camera:
1.
2.
3.
4.
To remove the desiccant sachet:
1.
2.
2016.06 | v1.0 | AM18-Q0710
Remove the outer dome by unscrewing the 3 attachment
bolts.
Remove the inner dome by gently pulling it from its mount
seal.
Store the domes in a safe place where the outer dome
cannot become scratched.
Remove the camera module from the surface mount box by
unscrewing the 3 screws.
Slide the sachet out of its storage slot in the camera.
Dispose of the sachet in an environmentally friendly way.
DESICCANT
SILICA GEL
x3
FLEXIDOME IP starlight
7000 VR
Bosch Security Systems