Advertisement
E2TC2BD_EN.book Page 43 Thursday, May 7, 2009 9:02 AM
To move a title:
1) Go to the dubbing list, then select a title using
[K \ L]. Then press [ENTER\OK].
2) Select "Move" using [K \ L], then press
[ENTER\OK].
3) Select a desired insert point using [K \ L], then
press [ENTER\OK].
To erase all the titles in the dubbing title list:
1) Select "Delete All" in the dubbing menu using
[K \ L], then press [ENTER\OK].
2) Select "Yes" using [K \ L], then press
[ENTER\OK]. Final confirmation message will
appear.
3) Select "Yes" using [K \ L], then press
[ENTER\OK].
• To go back and forth between dubbing menu and
dubbing list, use [{ \ B].
7
After adding all the titles you want, select
"Dubbing Start" in the dubbing menu using
[K \ L], then press [ENTER\OK].
8
Select a desired recording mode using [{ \ B],
then press [ENTER\OK].
e.g.) HDD A DVD
Please select REC MODE.
High
XP
SP
LP
EP
Dubbing Titles
Confirmation message will appear.
• Depending on the dubbing direction, the available
recording mode varies.
• When dubbing from HDD to DVD, you can select "High"
to perform the high speed dubbing (refer to "Recording
Mode for Dubbing" on page 41 for more details).
9
Select "Yes" using [K \ L], then press
[ENTER\OK].
Start Dubbing?
Yes
No
If dubbing continues when timer recording starts, the next
display will appear.
Timer Recording is in standby.
Start Dubbing?
Yes
No
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.
Note
• Dubbing will be cancelled 2 minutes before starting timer
recording.
Setting a Disc to Protect
To prevent accidental over-recording, editing or erasing of
recordings, you can protect them using "Setup" menu.
Insert a recordable disc.
1
2
3
4
5
• The Disc Protect setting is available only when a disc
• You can select only "Disc Protect ON A OFF" when a
To cancel the disc protect:
• Select "Disc Protect ON A OFF" at step
• If you insert a disc protected with this unit, "Disc Protect
SLP
Auto
500 MB
3000 MB
Finalising Discs
You will need to finalise discs to play them back in other units.
Finalising may take from several minutes up to an hour.
A shorter recording period on the disc will require a longer
time period for finalisation. Do not unplug the mains cable
during finalisation.
Insert a recordable disc before finalising.
1
2
3
4
VR
DVD-RW
DVD-RW
DVD-RW
DVD+RW
DVD+RW
DVD+RW
DVD+R
DVD+R
DVD+R
In stop mode, press [SETUP].
Select "DVD Menu" using [K \ L], then press
[ENTER\OK].
Select "Disc Protect OFF A ON" using [K \ L],
then press [ENTER\OK].
Select "Yes" using [K \ L], then press
[ENTER\OK].
The disc is protected.
Press [SETUP] to exit.
Note
recorded in VR or +VR mode is inserted.
protected disc is inserted.
ON A OFF" will appear instead of "OFF A ON".
Video
VR
DVD-RW
DVD-RW
DVD-RW
DVD-RW
DVD-RW
DVD-RW
DVD-R
DVD-R
DVD-R
In stop mode, press [SETUP].
Select "DVD Menu" using [K \ L], then press
[ENTER\OK].
Select "Finalise" using [K \ L], then press
[ENTER\OK].
Select "Yes" using [K \ L], then press
[ENTER\OK].
Finalise disc?
Yes
No
Finalising will start.
3
, then select "Yes".
DVD+RW
DVD+RW
DVD+RW
DVD+R
DVD+R
DVD+R
43
EN
Advertisement
