Advertisement
E2TC2BD_EN.book Page 35 Thursday, May 7, 2009 9:02 AM
Skip the Periodical Timer Recording
You can deactivate the periodical (Daily, Mon-Fri or Weekly)
timer recording temporarily.
1
In stop mode, press [TIMER PROG.].
2
Select the periodical timer recording
programme you want to skip using [K \ L], then
press [ENTER\OK].
3
Select "Programme Change" using [K \ L], then
press [ENTER\OK].
4
Move the cursor to the "Skip" field using
[{ \ B], then select "ON" using [K \ L] and
then press [ENTER\OK] to activate the setting.
• "✔" will be displayed on the left side of the timer
programme.
• The setting will go back to "OFF" after the programme is
skipped once.
Stop the Timer Recording in Progress
On the front panel:
Press [C STOP].
On the remote control:
1 Press [STOP C].
2 Select "Yes" using [K \ L], then press
[ENTER\OK].
If the Timer Programming did not
Complete Correctly
The error number appears on "Timer Programming" list.
Timer Programming
Date
Start
End
E40 03/12
7:00
9:00
New Programme
The error programme will be displayed in gray with an error
number.
The error numbers indicate:
E1–E22, E37–E39 Recording error
E23–E24
Unrecordable disc
E25/E51
• Copy prohibited programme
• Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28
Copy prohibited programme
E29
Disc protected
E30
Disc full
E31
Already recorded 99 titles (video mode)
E32
Already recorded 99 titles (VR mode)
E33
Already recorded 999 chapters
E34
No space for Control Information
E35
PCA (Power Calibration Area) full
E36
Already finalised video format disc
10:00
THU
03/12
STTL
CH
PDC
1 BBC1
1/1
E40
• There are some unrecorded parts due
to the overlapped timer programmes.
• Recording did not start at the start
time.
E41
Power failure
E42
No disc
E43
Already 49 titles recorded (+VR mode)
E44
Already 254 chapters recorded (+VR
mode)
E45
Copy prohibited programme
E46
It is impossible to record additionally on
a disc recorded by other units when
setting "Make Recording Compatible" to
"OFF". (+VR mode)
E47
Already 600 titles recorded on the HDD.
E49–E50
HDD recording is cancelled due to the
insufficiency of the disc space on the
HDD.
• Timer programme with an error number will be cleared once
the entry screen for the programme is displayed.
Notes for the Timer Recording
• If there is a power failure or the unit is unplugged for more
than 30 seconds, the clock setting and all timer settings will
be lost.
• If a disc is not inserted or if a inserted disc is not recordable
(finalised DVD-RW/-R, finalised DVD+R, a fully recorded
disc, etc.), the unit will perform the alternate recording to the
HDD. (See page 34.)
• When a timer recording is completed, the unit will ask you
whether to turn off the unit if there is no timer recording
which starts within 4 minutes, except under conditions listed
below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
The unit will be turned off automatically if you select "Yes" or
if you do not reply in 1 minute.
• When the programmed starting and ending time are earlier
than the current time, the setting will not be accepted.
• The audio language which is selected in the "DVB Setting"
will be recorded for digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours
cannot be made.
• It is prohibited to turn off the unit from 4 minutes before the
programmed starting time.
• It is prohibited to change channel from 15 seconds before
the programmed starting time.
• [REC I] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes before
the starting time during regular or one-touch timer recording,
the recording in progress will be stopped.
• Playback of DVD/CD is prohibited from 2 minutes before the
programmed starting time when the recording media is DVD.
If it comes to 2 minutes before the programmed starting time
during DVD/CD playback, the playback will be stopped.
• When 2 or more programmes are overlapped, "Timer
programme overlapped" appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme refer to "Checking, Cancelling or Correcting the
Timer Programming Information" on page 34.
• If the Start time is earlier and the End time is later than the
current time, the recording will start immediately after you
10
press [ENTER\OK] at step
on page 34.
35
EN
Advertisement
