TRENDnet TEW711BRV2 User Manual page 20

TRENDnet User's Guide
PIN (Personal Identification Number)
Wireless >WiFi Protected Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see "Access your router management page"
on page 27).
2. Click on Wireless, and click on WPS.
3. Next to Client PIN Number, enter the WPS PIN of the wireless device you are
connecting and click Start PIN.
Note: You may need to initiate the WPS PIN on your wireless device first when using this
method. Refer to your wireless device documentation for details on the operation of
WPS.
© Copyright 2013 TRENDnet. All Rights Reserved.
WPS PIN Security
Wireless >WiFi Protected Setup
To protect your wireless network against WPS PIN attacks, the WPS Auto Lock Down
State feature will automatically disable the WPS PIN method after 10 failed WPS PIN
attempts. Once lock down state is activated, the WPS PIN method will be disabled until
you access the router management page and unlock it.
1. Log into your router management page (see "Access your router management page"
on page 27).
2. Click on Wireless, and click on WPS.
3. If Auto-lock-down-state is activated, the status will display as Locked. To unlock this
state and re-enable WPS PIN method, click Unlock.
4. To save changes, click Apply.
TEW-711BR
17