AEG L6FBXXL User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L6FBXXL
  6. User manual

AEG L6FBXXL User Manual

Washing machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L6FBXXL
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L6FBXXL

Summary of Contents for AEG L6FBXXL

  • Page 1 L6FBXXL User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    18. ENVIRONMENTAL CONCERNS..............39 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. The appliance maximum load is 10 kg. Do not exceed •...
  • Page 5 ENGLISH • Follow the installation instructions • Connect the mains plug to the mains supplied with the appliance. socket only at the end of the • Do not install or use a damaged installation. Make sure that there is appliance. access to the mains plug after the •...

  • Page 6: Product Description

    Please Prewash such fabrics by hand before note that some of these spare parts loading them into the washing are only available to professional machine. repairers, and that not all spare parts •...

  • Page 7: Technical Data

    ENGLISH 3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).

  • Page 8: Installation

    Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐ ture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 9 ENGLISH 5. Put the front polystyrene packaging It is possible to see element on the floor behind the water flowing from the appliance. drain hose. This is due 6. Carefully put down the appliance with to the testing with water the rear side on it.
  • Page 10 Make sure that carpets do not stop the air circulation below the appliance. Make sure that the appliance does not touch the wall or other units. 2. Loosen or tighten the feet to adjust the level. WARNING! Do not put cardboard, wood 5.3 The inlet hose...
  • Page 11 ENGLISH CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose. 2. On the edge of a sink - Fasten the guide to the water tap or to the wall.

  • Page 12: Accessories

    6. ACCESSORIES 6.1 Available in Only appropriate www.aeg.com/shop or from accessories approved by authorised dealer AEG ensure the safety standards of the appliance. If Read carefully the instructions supplied unapproved parts are used, with the accessory. any claims will be...

  • Page 13: Control Panel

    If you install the appliance on a plinth under the washing machine. that is not an accessory supplied by Verify the compatible AEG, secure the appliance in the fixing stacking kit by checking the plates. depth of your appliances. Read carefully the instructions supplied with the accessory.
  • Page 14 Startuitstel touch button • Vlekken option • Voorwas option Tijd besparen touch button Anti-allergie touch button Spoelen skipping touch button Soft Plus touch button • Extra Spoelen option • Only rinse option Centrif. reduction touch button Start/Pauze touch button...

  • Page 15: Dial And Buttons

    ENGLISH Child safety lock indicator. Temperature indicator. The indicator appears when a cold wash is set. Spin speed indicator. No spin speed indicator. Spin phase is off. Rinse hold indicator. Extra silent indicator. Time saving indicator. 8. DIAL AND BUTTONS 8.1 Aan/Uit 8.3 Temperatuur Pressing this button for a few seconds...
  • Page 16 If you touch the Start/Pauze button, Use this option to add a pre-wash the appliance performs the spinning phase at 30 °C before the washing phase and drains the water. phase. This option is recommended for The appliance empties...

  • Page 17: Programmes

    ENGLISH This option ensures also a proper This option increases slightly reduction of pollens/allergenic items. the programme duration. Tested for Staphylococcus aureus, Enterococcus 8.10 Startuitstel faecium, Candida albicans, With this option you can delay the start of Pseudomonas aeruginosa a programme in a more convenient time. and MS2 Bacteriophage in external test performed by Touch the button repeatedly to set the...
  • Page 18 Programme Programme description Machine washable wool, hand washable wool and other Wol/Zijde fabrics with «hand washing» care symbol Outdoor Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation.
  • Page 19 ENGLISH Default tempera‐ Maximum load Reference spin ture Programme speed Temperature Spin speed range range 40 °C 1400 rpm Katoen 10 kg 95 °C - Cold 1400 rpm - 400 rpm 40 °C 1200 rpm Synthetica 4 kg 60 °C - Cold 1200 rpm - 400 rpm 30 °C 1200 rpm...
  • Page 20 Programme options compatibility OPTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Centrif. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Vlekken ■ ■ ■ ■ Voorwas ■ ■...

  • Page 21: Settings

    ENGLISH Universal Liquid Uni‐ Liquid for Delicates Programme Special versal coloureds woollens powder ▲ ▲ Outdoor ▲ ▲ 20 min. - 3 kg ▲ ▲ Dekbed ▲ ▲ ▲ Strijkvrij 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲...

  • Page 22: Before First Use

    The display shows above the off . 11. BEFORE FIRST USE 1. Make sure that all transit bolts have 4. Set and start a programme for cotton been removed from the appliance. at the highest temperature without 2.
  • Page 23 ENGLISH 12.3 Filling the detergent and additives 2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap Compartment for prewash phase, down. soak programme or stain remover. Compartment for washing phase.
  • Page 24 12.5 Setting a programme 3. Touch the Start/Pauze button again to start the programme immediately. 1. Turn the programme dial to select the desired washing programme. The Changing the delay start after related programme indicator comes the countdown has started...
  • Page 25 ENGLISH 12.10 Interrupting a At the end of the load detection, in case programme and changing the of drum overload, the indicator flashing in the display: options In this case, for 30 seconds, it is possible When the programme is running, you to pause the appliance and remove the can change only some options: exceeding garments.
  • Page 26 In the display the related door lock 4. Keep the door and the detergent indicator goes off. dispenser slightly ajar to prevent mildew and odours. 5. Close the water tap. 12.14 Draining water out after end of cycle If you have chosen a programme or an...

  • Page 27: Hints And Tips

    ENGLISH • You do not use the appliance for 5 Turn the programme dial to set a new minutes before you touch the Start/ cycle. Pauze button. If you set a programme or an Press the button Aan/Uit to activate option that ends with water the appliance again.

  • Page 28: Care And Cleaning

    13.3 Detergent type and • sudsing, • reduced washing effect, quantity • inadequate rinsing, • a greater impact for the environment. The choice of detergent and use of correct quantities not only affects your 13.4 Ecological hints wash performance, but also helps to...
  • Page 29 ENGLISH 14.1 Periodic cleaning 14.3 External cleaning schedule Clean the appliance with mild soap and warm water only. Fully dry all the Periodic cleaning helps to extend the surfaces. Do not use a scouring pads or life of your appliance. any scratching material.
  • Page 30 Regularly examine the seal. Coins, buttons, other small items can be recovered at the end of the cycle. 2. Remove the top part of the additive compartment to aid cleaning and Clean it when needed, using ammonia...
  • Page 31 ENGLISH 2. Place a suitable bowl below the drain pump access to collect the water that 14.9 Cleaning the drain pump flows out. 3. Open the chute downwards. Always WARNING! keep a rag nearby to dry up any Disconnect the mains plug water spillages when removing the from the mains socket.
  • Page 32 8. If it is necessary, remove fluff and 12. Close the pump cover. objects from the filter recess. 9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre.

  • Page 33: Troubleshooting

    ENGLISH 14.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0°...
  • Page 34 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the...
  • Page 35 ENGLISH If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...

  • Page 36: Consumption Values

    Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature.
  • Page 37 ENGLISH Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.

  • Page 38: Quick Guide

    Programme Litres h:mm °C Fijne was 0.35 1:25 1200 30°C Wol/Zijde 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.

  • Page 39: Environmental Concerns

    ENGLISH Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description White and coloured cottons. Normally soiled Eco 40-60 10 kg garments. 10 kg White cotton and coloured cotton. Katoen 4 kg Synthetic items or mixed fabric items.
  • Page 40 135989970-A-302021...

Table of Contents