AEG L6FBN8400 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L6FBN8400
  6. User manual

AEG L6FBN8400 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L6FBN8400
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L6FBN8400

Summary of Contents for AEG L6FBN8400

  • Page 1 L6FBN8400 User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    18. ENVIRONMENTAL CONCERNS..............38 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. The appliance maximum load is 8 kg. Do not exceed •...
  • Page 5 ENGLISH • Follow the installation instructions • Connect the mains plug to the mains supplied with the appliance. socket only at the end of the • Do not install or use a damaged installation. Make sure that there is appliance. access to the mains plug after the •...

  • Page 6: Product Description

    Please Prewash such fabrics by hand before note that some of these spare parts loading them into the washing are only available to professional machine. repairers, and that not all spare parts •...

  • Page 7: Technical Data

    ENGLISH 3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).

  • Page 8: Installation

    Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐ ture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 9 ENGLISH 4. Remove the three bolts by using the key supplied with the appliance. Pull out the plastic spacers. We recommend that you keep the packaging and The appliance must be level and stable. the transit bolts for any transport of the appliance. A correct adjustment of the appliance level prevents the 5.
  • Page 10 45º 45º 20º 20º If this occurs, close the water tap and contact the authorized service centre to replace the hose. 5.5 Water drainage The drain hose should be positioned at a height of not less than 60 cm and not Make sure that the inlet hose more than 100 cm from the floor.
  • Page 11 ENGLISH 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.

  • Page 12: Accessories

    If you install the appliance on a plinth WARNING! that is not an accessory supplied by Do not put the tumble dryer AEG, secure the appliance in the fixing under the washing machine. plates. Verify the compatible stacking kit by checking the Read carefully the instructions supplied depth of your appliances.

  • Page 13: Control Panel

    ENGLISH 7. CONTROL PANEL 7.1 Control panel description Programme dial • Only rinse option Display Centrifugeren reduction options Startuitstel touch button touch button • No spin option Tijd besparen touch button • Rinse hold option Start/Pauze touch button Temperatuur touch button Extra touch button •...

  • Page 14: Knob And Buttons

    The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code ( Extra rinse indicator. It lights on when this option is se‐ lected . indicator blink during the laundry load detec‐...
  • Page 15 ENGLISH containing sand, dust , mud and other The appliance empties the solid particles. water out automatically after 18 hours approximately. This option can increase the programme duration. Activate the No spin option • Only rinse • Set this option to deactivate all spin The appliance performs only the phases.

  • Page 16: Programmes

    9. PROGRAMMES 9.1 Programme Chart Washing programmes Programme Programme description Washing programmes White cotton and fast-coloured cotton. Normally soiled Eco 40-60 items. The energy consumption decreases and the time of the washing programme is extended, ensuring good washing re‐...
  • Page 17 ENGLISH Programme Programme description All fabrics, except woollens and delicate fabrics. To spin Centrifugeren/Pompen the laundry and to drain the water in the drum. 1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
  • Page 18 Programme Default temper‐ Reference spin Maximum load ature speed Temperature Spin speed range range 1400 rpm 60 °C 8 kg Anti-allergie 1400 rpm - 800 rpm 1400 rpm 8 kg Centrifugeren/Pompen 1400 rpm - 800 rpm 1) According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normal‐...
  • Page 19 ENGLISH OPTIONS Startuitstel ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) This option is not available with temperature lower than 40 °C. 2) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully load the appliance, however the washing results can be less satisfactory.

  • Page 20: Settings

    9.2 Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine.

  • Page 21: Daily Use

    ENGLISH 12. DAILY USE 12.3 Filling the detergent and WARNING! additives Refer to Safety chapters. 12.1 Activating the appliance 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press the button for a few seconds to activate the appliance.
  • Page 22 12.4 Check the position of the With the flap in the flap position DOWN: • Do not use gelatinous 1. Pull out the detergent dispenser until or thick liquid it stops. detergents. 2. Press the lever down to remove the •...
  • Page 23 ENGLISH 12.6 Starting a programme 12.8 The ProSense load with the delay start detection Touch the Start/Pauze button. The programme duration in The appliance starts the countdown of the display is referred to a the delay start. medium/high load. When the countdown is completed, the programme starts.
  • Page 24 12.9 Interrupting a In the display the related door lock indicator goes off. programme and changing the options When the programme is running, you can change only some options: 1. Touch the button Start/Pauze. The related indicator flashes. 2. Change the options. The given information in the display changes accordingly.

  • Page 25: Hints And Tips

    ENGLISH 4. Keep the door and the detergent In any case, the appliance dispenser slightly ajar to prevent empties the water out mildew and odours. automatically after 5. Close the water tap. approximately 18 hours. 12.13 Draining water out after 12.14 Stand-by option end of cycle The Stand-by function automatically...
  • Page 26 • Do not wash laundry without hems or programmes (60 °C max) for all with cuts. Use a washing bag to wash types of fabric, or special ones for small and/or delicate items (e.g. woollens only. underwired bras, belts, tights, •...

  • Page 27: Care And Cleaning

    ENGLISH domestic system. Refer to 'Water additive for water softening. In areas hardness'. where the water hardness is soft it is not • Set the maximum possible spin necessary to use him. speed for the selected washing To find out the water hardness in your programme before drying your area, contact your local water authority.
  • Page 28 14.4 Descaling Clean it when needed, using ammonia cream cleanser agent without scratching If the water hardness in your the seal surface. area is high or moderate, we Always obey the instructions recommend that you use a that you find on the water descaling product for packaging of the product.
  • Page 29 ENGLISH water, to remove any traces of 4. Insert the detergent drawer into the accumulated detergent. After guide rails and close it. Run the cleaning, put the top part back into rinsing programme without any position. clothes in the drum. 3.
  • Page 30 Proceed as follows to clean the pump: 180˚ WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
  • Page 31 ENGLISH 14.10 Cleaning the inlet hose right (not in vertical position) depending on the position of your and the valve filter water tap. It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1.

  • Page 32: Troubleshooting

    15. TROUBLESHOOTING WARNING! Refer to Safety chapters. 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check.
  • Page 33 ENGLISH • Wait until mains supply is stable. The mains supply is unstable. • Disconnect the appliance and close the water tap. Contact the Authorised Service Centre. The anti-flood device is on. If the display shows other alarm codes, deactivate and activate the appliance.

  • Page 34: Consumption Values

    Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes "Installation instruction". an unusual noise and • Make sure that the packaging and/or the transit bolts are re‐ vibrates. moved. Refer to "Installation instruction".
  • Page 35 ENGLISH The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.

  • Page 36: Quick Guide

    16.4 Common programmes These values are indicative only. Programme Litres h:mm °C Katoen 2.45 4:05 1400 95°C Katoen 1.75 3:50 1400 60°C Katoen 20° 0.30 2:50 1400 20°C Synthetica 0.60 2:15 1200 40°C Fijne was 0.40 1:15 1200 30°C Wol/Zijde 0.30...
  • Page 37 ENGLISH 2. Set the desired options (1) by means Push the Aan/Uit button to turn the of the corresponding touch buttons. appliance off. To start the programme, touch the Start/Pauze (2) button. 3. The appliance starts. At the end of the programme, remove the laundry.

  • Page 38: Environmental Concerns

    Programmes Load Product description All fabrics, except woollens and very delicate Centrifugeren/Pompen 8 kg fabrics. Programme for spinning and draining the water. 1) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐ sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test Report No.
  • Page 40 135992980-A-242021...

Table of Contents