Philips HD7854/84 User Manual page 25

35 min
7 Press the CLEAN/CALC CLEAN button to start the descaling cycle.
Never interrupt the descaling cycle.If you interrupt the descaling cycle,
see chapter Troubleshooting for further instructions.
- The CALC light and the light ring around the on/off button start to
flash slowly to indicate that the descaling cycle has started.
- The descaling cycle takes approx. 35 min. During this cycle, hot water
comes out of the coffee spout at intervals because the machine pauses
several times to let the descaler mixture act.
- When all the water in the water reservoir has been used up, the
descaling cycle is finished. The light ring around the on/off button starts
to flash rapidly to indicate that the water reservoir is empty.
rinsing cycle
1 Empty the bowl and place it back under the spout.
2 Rinse the water reservoir.
3 Fill the water reservoir with fresh tap water and place it back onto
the coffee machine.
Note: Do not refill the water reservoir with used hot water or the used
descaling mixture.
The machine is ready for the rinsing cycle when the on/off light lights
,
up continuously.
EnglisH
25