Philips HD7854/84 User Manual page 22

EnglisH
22
3 Close the lid and lock the lid lever.
4 Put a bowl (with a capacity of 1.5 litres) under the coffee spout to
collect the water.
5 Press the on/off button 3.
The light rings around the 1-cup button q and the 2-cup button
,
qq light up continuously.
6 To start flushing, press the 1-cup button q and the 2-cup button
qq briefly at the same time.
During the flushing cycle, the water in the water reservoir is flushed
,
through the machine and the boiler is filled with fresh water. The
flushing cycle takes some time (approx. 90 to 150 seconds).
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly with fresh water.
Note: During the flushing cycle, the machine produces more noise than during
a regular brewing cycle.
The machine switches off automatically when the flushing cycle ends.
,
Now your Philips SENSEO coffee machine is ready for use again.
®