Wired Network Projection; Selecting Wired Network Settings - Epson EB-L1750U User Manual

Wired Network Projection

You can send images to your projector through a wired network. To do
this, connect the projector to your network, and then set up your projector
and computer for network projection.
After connecting and setting up the projector, install Epson iProjection
from the Epson Projector Software CD-ROM (if available) or Web site.
Epson iProjection software sets up your computer for network projection. It
also allows you to hold interactive meetings by projecting user's computer
screens over a network. See the "Epson iProjection Operation Guide
(Windows/Mac)" for instructions.

Selecting Wired Network Settings

Before you can project from computers on your network, you need to select
network settings on the projector.
a
Make sure you already connected the projector to your wired network
using the LAN port.
s "Connecting a LAN Cable"
a
Press the [Menu] button on the control panel or remote control.
p.54
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Basic menu and press [Enter].
e
Select the basic options as necessary.
127