Table of Contents
Advertisement
Phase
: Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use the Phase to correct it. This is a fine
adjustment.
Note:
The Phase can be adjusted only in VGA mode.
Display
The Display menu allows you to modify the display settings, such as keystone and posi-
tion.
Auto Keystone
the projector.
Note:
The Auto Keystone function can be only used to adjust the image distortion vertically.
Keystone
: Adjust image distortion caused by tilting the projector (+/-40 degrees).
Note:
If you adjust the keystone degree manually then the Auto Keystone function will be auto-
matically switched off.
Projection
mounted.
Auto Keystone
y
Auto Keystone
y
28 English
Auto Keystone
Keystone
Projection
Select
: Select On to automatically adjust image distortion caused by tilting
: Select the projection mode, depending upon how the projector is
: On
No reverse
Left/ Right reverse
: Off
No reverse
Left/ Right reverse
Up/ Down reverse
Up/ Down and Left/ Right reverse
Display
On
Exit
Enter
Advertisement
Table of Contents
