Image - Optoma ML1050st User Manual

Image

The Image menu allows you to modify various image settings, such as 3D, format,
zoom, color temperature, color space, and others.
3D
: Turn the 3D function on or off.
3D Sync. Invert
Note:
-3D/3D Sync. Invert cannot be changed when you select image settings.
- In 3D mode, the maximum supported input timing is 1024x768 @ 120Hz.
Format : Select the format to adjust how the image appears. Options are:
Auto : Maintain the aspect ratio of the image projector according to the input
y
source.
4:3 : The input source scales to fit the screen and projects a 4:3 image.
y
16:9 : The input source scales to fit the screen and projects a 16:9 image.
y
16:10 : The input source scales to fit the screen and projects a 16:10 image.
y
Zoom : Zoom in or zoom out the image. Options are: 50%, 75%, 100%, 125%, 150%,
175%, or 200%.
Color Temperature
Cold.
Note:
The Color Temperature function is not supported in Bright, Eco, and 3D modes.
Color Space : Select an appropriate color matrix type. Options are: Auto, RGB, and
YUV.
Note:
The Color Space function is supported only in HDMI mode.
Frequency : Change the display data clock frequency to match the frequency of your
computer's graphics card. If you see a vertical flickering wave, use the Frequency
control to minimize the bars. This is a coarse adjustment.
Note:
The Frequency can be adjusted only in VGA mode.
3D
3D Sync. Invert
Format
Zoom
Color Temperature
Color Space
Frequency
Phase
Select
: Turn the 3D sync. inverter option on or off.
: Select the color temperature. Options are: Warm, Medium, and
Image
On
Off
Auto
Warm
Auto
Exit Enter
27
English