Dell M02M002 User Manual page 49

To check the current Wi-Fi network connection
From the status bar:
When your device is connected to a wireless network, the Wi-Fi icon
in the status bar indicates the signal strength (number of bands
that light up). If Wireless & networks→ Wi-Fi settings→ Network
notification is enabled, the
device discovers an accessible Wi-Fi network within range.
From the Wi-Fi network:
1 Touch the Home button
Wireless & networks→ Wi-Fi settings.
2 Touch the Wi-Fi network that the device is currently connected to
(labeled Connected). A window opens displaying the Wi-Fi
network's name, status, security info, signal strength, link speed,
and IP address.
NOTE:
If you want to disconnect the Wi-Fi network from your device,
touch Forget on this window. You will need to configure the Wi-Fi
settings again if you want to restore connection to this wireless network.
To connect to another Wi-Fi network
1 Touch the Home button
Wireless & networks→ Wi-Fi settings. The detected Wi-Fi
networks are displayed in the Wi-Fi networks list.
NOTE:
To start a new search for available Wi-Fi networks, on the Wi-Fi
settings screen, touch the Menu button
2 Flick through the Wi-Fi networks list and touch the name of the
network you want to connect to.
NOTE:
If the wireless network you want to connect to is not in the list of
detected networks, flick to the bottom of the list to touch Add Wi-Fi
network. Enter the Wi-Fi network settings, and then touch Save.
icon appears in the status bar as the
→ Menu button
→ Menu button
→
Scan.
→ Settings→
→ Settings→
Internet
49