Emergency Recovery - Dell M02M002 User Manual

NOTE:
To exit the Safe mode, turn off your device and turn it on
normally again.

Emergency Recovery

If your device does not turn on or respond due to corrupt system files,
you can perform an emergency recovery by restoring your device to
the factory default state, or by upgrading the software on your device.
To restore your device to the factory default state
1 Press and hold the power button
off option on the screen to turn off the device.
2 Press and hold the volume up button
releasing
device turns on the configuration menu.
3 To restore the device to the factory default state, press the
volume up button
move the highlight bar on the menu to either of these options:
• Factory reset (User data only): Restores the device to the
factory default state and erases all your user data including
contacts, settings, and downloaded applications from the
internal application storage.
Factory Reset (User data and internal tablet storage):
•
Restores the device to the factory default state and erases the
following data:
All your user data including contacts, settings, and
a
downloaded applications stored in the internal application
storage.
All your personal files except the preinstalled ones stored in
b
the internal tablet storage.
4 Press the power button
5 Wait for the device to reboot the system.
press and hold the power button
or the volume down button
to start the reset process.
and then touch the Power
, and without
Troubleshooting
, until the
to
131