7
Clone configuration
7�1
From USB to TV
Copy TV configuration data from a USB stick
to TV.
1.
Insert the USB stick to the USB connector
at the side of the TV.
2.
Enter
Setup menu.
3.
Press
ï to select SETUP > CLONING/
UPGRADE > CLONING > USB TO
TV.
4.
Press
Æ to enter USB TO TV.
5.
Press
Æ to load data to the TV.
CLONING
USB TO TV
TV TO USB
Note
D
• During the process of copying, do not
remove the USB stick.
• All remote control command and
control buttons on the TV are disabled.
6.
Switch off and then on to reset the TV
after cloning.
7�2
From TV to USB
Copy TV configuration data from TV to USB
stick.
1.
Insert the USB stick to the USB connector
at the side of the TV.
2.
Enter
Setup menu�
3.
Press
ï to select SETUP > CLONING/
UPGRADE > CLONING > TV TO
USB.
4.
Press
Æ to enter TV TO USB.
5.
Press
Æ to load data to the USB stick.
USB TO TV
TV TO USB
Note
D
• During the process of copying, do not
>
remove the USB stick.
>
• All remote control command and
control buttons on the TV are disabled.
6.
Switch off and then on to reset the TV
after cloning.
CLONING
>
>
EN-23