IdEo AdJustment; Set Energy Saving - Philips 32HFL5850D/10 Setup Manual

will be marked as 'SKIPPED' at auto
installation.
• STEP TUNING
Select YES to enable tuning for each digit
entry.
• DIGIT TIMEOUT
Select 1 to 9�9 seconds for a channel
to switch to another channel. The
recommended and default setting is 3.0
seconds.
• 3 DIGIT TUNING
Select YES to enable tuning up to 3-digit
channels.
• AUTO SCART
Select AVI (EXT1), AV2 (EXT2), ALL,
POWER SCART or NO.
• AV1
Select the AV1 channel when a
scart cable is connected to the AV1
connector.
• AV2
Select the AV2 channel when a
scart cable is connected to the AV2
connector.
• ALL
Select the respective channel when
a scart cable is connected to an AV
connector.
• POWER SCART
Switch on the TV from standby mode
automatically when a scart signal is
detected. Switch the TV to standby
mode automatically in the absence of a
scart signal.
• NO
Disable AUTO SCART feature.
• ALWAYS RGB
Select AUTO, AV1, NO_RGB or NO.
• AUTO
Allow RGB insertion in any sources.
• AV1
Allow RGB insertion in AV1 (EXT1)
and other sources.
• NO_RGB
Disallow RGB insertion in any sources.
• NO
Allow RGB insertion in AV1 (EXT1)
only.
6�14 Video adjustment
1. Enter SETUP menu.
2. Press ï to select CONFIGURATION >
VIDEO ADJUSTMENT.
VIDEO ADJUSTMENT
HORIZONTAL
VERTICAL
PHASE
CLOCK
AUTO ADJUST
RESET
3. Press ï to select setting and Í Æ or Æ to
select options.
6�15 Set energy saving
1. Enter SETUP menu.
2. Press ï to select CONFIGURATION >
ENERGY SAVING.
ENERGY SAVING
LOW POWER STANDBY
ESP
SMART POWER
3. Press ï to select setting and Æ to select
options.
< >
< >
< >
< >
>
>
FAST
1
LOW
EN-21