Table of Contents
Advertisement
Installation Procedure
5 Apply heat to the contraction tube to contract it.
Method 1
Contraction tube
6 Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Method 1
Insulation tape
1.57 inch (40 mm)
7 After tube contraction work is completed, wrap it with
the insulation tape to finish.
Three or more layers of insulation are required.
Method 1
Insulation tape
CAUTION
• Make sure that the connection parts are not exposed
to outside.
• Be sure to use insulation tape and a contraction tube
made of approved reinforced insulating materials
that have the same level of withstand voltage with
the power cable. (Comply with the local regulations on
extensions.)
WARNING
• In case of extending the electric wire, please DO NOT
use a round-shaped Pressing socket.
– Incomplete wire connections can cause electric
shock or a fire.
22
English
Method 2
Contraction tube
Method 2
Insulation tape
1.38 inch (35 mm)
Method 2
Insulation tape
Step 14 Optional: For the installation
of the circular panel
Making a circular opening on the ceiling
Use a paper compass printed on the indoor unit package.
(attached inside to the upper part)
1 Use a bolt or a pin to fix pivot point of the paper
compass on center of the ceiling. (in the middle of
location for installation)
2 Put a pencil at the opposite side of the pivot point
fixed in place.
3 Rotate the paper compass on its pivot point to draw a
line on the ceiling.
Advertisement
Table of Contents
