What To Do If; Remedying Faults - AEG LAVAMAT 76730 User Information

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
• If the fault code E10, E20 or E40 is shown in
the multidisplay, you may be able to remedy
the fault yourself (see Faults Table below).
After remedying the fault, press the button START/PAUSE (START/
PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform
Customer Service.
• In the case of all other displayed faults (E and number or letter),
please inform the Customer Service and state the fault code.
Problem
The washing machine
does not work.
The filling door cannot
be closed.
E40
Fault code
appears. The indicator
MAIN WASH (HOOFD-
WAS, LAVAGE) flashes.
Possible Cause
The mains plug is not
plugged in.
The fuse of the building's
wiring is not in order.
The filling door is not cor-
rectly closed.
The button START/PAUSE
(START/ PAUZE, MARCHE/
PAUSE) was not pressed for
long enough.
The child lock is set.
The filling door is not
correctly closed.
Instructions for use
Remedy
Plug in the mains plug.
Replace the fuse.
Close the filling door; the
lock must engage audibly.
Press the button START/
PAUSE (START/ PAUZE,
MARCHE/PAUSE) until the
program begins.
Cancel the child lock
(see section „Child Safety
Feature").
Close the filling door cor-
rectly. Restart the program.
33