Removal Of The Escutcheon And The Front Glass - Panasonic TH-42PH9WK Service Manual

7. Remove the 1 screw(L).
8. Disconnect the coupler(V2) and then remove the V1-Board.
9. Remove the operation button from the V2-Board.
10. Disconnect the coupler(V15) and then remove the V2-
Board.
6.18. Removal of the Escutcheon
and the Front Glass
1. Remove the S1-Board Block.
(Reference to Removal of the S1-Board)
2. Disconnect the couplers(J2, J15).
3. Remove the 2 screws of the Escutcheon.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
6. Remove the 18 screws and then remove the Fixed Angle
(A, B, C, D).
7. Remove the Front Glass
Note: when Front Glass is exchanged
· Each Front Glass Sponge must be stuck along the
edge of Fixed Angle.
Note
· The sponges are parts which cannot be recycled.
Please use the new article when you exchange the
Front Glass.
8. Remove the 1 screw (L) and then remove the V1-Board.
9. Remove the V2-Board and Operation Button.
15
TH-42PH9WK / TH-42PH9WS