TH-37PR10U / TH-42PR10U
6.14. Removal of GK-Board
1. Remove 2 screws(C) and then remove the Plate(A).
2. Remove 2 screws(D).
3. Disconnect the connector(GK3) and then remove GK-
Board.
6.15. Removal of K-Board
1. Remove 2 screws.
2. Then remove K-Board and disconnect the connector(K1).
6.16. Removal of Escutcheon and
the Front Glass
1. Disconnect the Relay connectors (DS2, DS8, DS15).
2. Disconnect the connector(S1).
3. Disconnect the connector(DS7).
4. Remove 2 screws ( ) and then remove the Ferrite core
from the Stand Block(L, R).
5. Remove 10 screws ( ).
6. Lift up the bottom of Plasma Panel to the arrow1 direction.
7. Pull the Plasma Panel to the arrow2 direction and then
remove the Plasma Panel.
14