Removal Of Escutcheon And Front Glass - Panasonic TH-58PH10UK Service Manual

6.19. Removal of Escutcheon and
Front Glass
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 8 screws of the Escutcheon.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
6. Remove 25 screws and then remove the Fixed Angle (A, B,
C, D).
7. Remove the Front Glass.
Note: when Front Glass is exchanged
· Along each fixed Angles of an top and bottom, right
and left order and the sponge for the Front Glass is
pasted to the Front Glass.
Note
· The sponges are parts which cannot be recycled.
Please use the new article when you exchange the
Front Glass.
8. Remove 1 screw (L) and then remove V1-Board.
9. Remove V2-Board and Operation Button.
15
TH-58PH10UK