Listen To A Preset Dab+ Radio Station; Show Dab+ Information; Remove Invalid Dab+ Station; Select Drc Setting - Philips AJB3552/12 User Manual

4
Press SELECT to confirm.
Searching starts.
»
5
When searching is complete, press
SELECT again to start playing.
Listen to a preset DAB+
radio station
1
Press / to select a preset DAB+
radio channel.
2
Press SELECT to confirm.

Show DAB+ information

While listening to DAB+ radio, press INFO
repeatedly to scroll through the following
information (if available):
Dynamic Label Segment (DLS)
»
» Signal strength
Program type (PTY)
»
Ensemble Name
»
» Channel and frequency
Signal error rate
»
Bit rate and audio status
»
Date
»

Remove invalid DAB+ station

You can remove all invalid stations from the
available DAB+ station list.
1
In DAB+ mode, press and hold MENU
for 3 seconds.
2
repeatedly until [Prune] is
Press /
displayed.
3
Press SELECT to confirm.
» [No][Yes] is displayed.
4
to select [Yes].
Press /
5
Press SELECT.
All invalid stations are removed.
»
EN
9

Select DRC setting

While listening to DAB+ radio, you can change
DRC (Dynamic Range Control) settings to add/
remove a degree of compensation for audio
performance.
1
In DAB+ mode, press and hold MENU
for over 3 seconds.
2
Press / until [DRC] is displayed.
3
Press SELECT to confirm.
4
Press / repeatedly to select an
option:
[DRC off]: DRC is switched off.
•
[DRC high]: DRC is switched on.
•
Recommend using this setting in
noisy environment.
[DRC low]: DRC is set to half
•
normal level.
5
Press SELECT to confirm the selection.