Dell Latitude 7530 Service Manual page 69

2. WWAN-card connector
3. WLAN-card connector
4. M.2 solid-state drive connector
5. Touch-screen cable connector
6. eDP cable connector
7. IR-camera cable connector
8. Sensor daughter-board cable connector
9. Thermal-fan cable connector
10. Main-speaker cable connector
11. Tweeter-speaker cable connector
12. Audio daughter-board FFC connector
13. Battery cable connector
14. Keyboard FFC connector
15. Touchpad FFC connector
16. USH daughter-board FFC connector
17. LED daughter-board FFC connector
18. Coin-cell battery cable connector
NOTE: For computers shipped without a WWAN card, a WWAN shielding cover and WWAN bracket is pre-installed to the
computer. As a result, follow the steps in the WWAN card removal/installation section to remove the WWAN shielding
cover and WWAN bracket before removing the system board.
CAUTION: First remove the thermal module before removing the system board as there are two screws (M2x3)
underneath the thermal module that secure the system board to the computer.
The following images indicate the location of the system board and provide a visual representation of the installation procedure.
Removing and installing components 69