Current Carrying Capacity Of The Inputs And Outputs; Installing A Payment System - Miele PWM514 Operating And Installation Instructions

Empty sensing
Payment system
in timed operation
Payment system
in programme
operation

Current carrying capacity of the inputs and outputs

During installation, make sure that the current consumption of the
additional components to be connected does not exceed the
permissible individual currents and total current consumption in the
neutral conductor.
During installation, make sure that connecting the washing
machine/tumble dryer in combination with the Connector Box and
the associated hardware do not exceed the total fuse rating of the
electricity supply.
The inputs and outputs are designed specifically for currents, as
described in the "Current carrying capacity table" section.
The switching element for contact 3.3 is designed in such a way that
a fan and frequency converter can be connected.
When connecting external hardware provided by other
manufacturers, the cable cross-section must not be less than 1 mm
with a maximum cable length of 2.5 m.
Empty sensing is connected to terminals 4.1 and 4.2. These meet
safety extra-low voltage requirements (class III).
The specifications of the sensor manufacturer must be observed.
The cables must be routed separately from all other cables.

Installing a payment system

The wiring diagram is provided at the end of these operating and
installation instructions in  ("Timed operation").
- C4030, C4031, C4065, C4070, C4080
- C5003
The wiring diagram is provided at the end of these operating and
installation instructions in  ("Programme operation").
- C4030, C4031, C4060, C4065, C4070, C4080
- C5002, C5004
en-AU, NZ - Installation
2
27