Warning And Safety Instructions; Technical Safety - Miele PWM514 Operating And Installation Instructions

en-AU, NZ - Warning and Safety instructions
22
This Connector Box complies with all relevant current safety
requirements. However, inappropriate use can lead to personal
injury and damage to property.
First read these operating and installation instructions for the
Connector Box. They contain important information on the safety,
use, and maintenance of the Connector Box. This prevents both
personal injury and damage to the machine.
Keep these operating and installation instructions in a safe place
and pass them on to any future owner.
Correct application

The Connector Box is intended to be used solely to establish a
connection between a Miele Professional machine and external
hardware, such as a peak-load cut-out system, a coin payment
device, an additional fan, an exhaust valve or dispenser pumps. Any
other applications may be dangerous.
Miele cannot be held liable for damage resulting from incorrect or
improper use or operation.

The Connector Box is intended to be used exclusively in
conjunction with Miele Professional machines with a connection
coupling that has been fitted at the factory.

Technical safety


The Connector Box must only be installed and assembled by
qualified electricians who have made sure that the conditions for its
correct use are met.

Before installation, check the Connector Box for visible signs of
damage. Do not install or use a damaged Connector Box.

The Connector Box must not be repaired in the event that it
displays a defect or damage.
In such cases, the Connector Box must be replaced by a new one.

The Connector Box is only disconnected from the mains power
supply if the Miele Professional machine has been disconnected in
accordance with the specifications provided in the operating and
installation instructions.

The connection cables between the Miele Professional machine
and Connector Box must not become trapped.

The Connector Box must be assembled on site or mounted on the
washing machine with a special machine attachment (optional
accessory).

The Connector Box must be accessible after being mounted on a
wall to enable service work to be carried out.

The mains connection cables for the Connector Box must be
assembled and routed correctly.