Logging In To A Server Node Over A Network Port By Using Putty - Huawei TaiShan X6000 User Manual

TaiShan X6000 Server
User Guide
Step 7 Perform any of the following operations based on the actual situation:
●
●
●
The IRC of the server node is displayed, as shown in
Figure 12-23 IRC of the server node
----End
12.4 Logging In to a Server Node Over a Network Port
by Using PuTTY
Procedure
Step 1 Set an IP address and a subnet mask or add route information for the PC so that
the PC can properly communicate with the server.
You can run the Ping
HMM) command on the PC command-line interface (CLI) to check the
communication between the PC and the server.
Step 2 Double-click PuTTY.exe.
The PuTTY Configuration window is displayed, as shown in
Issue 04 (2020-06-05)
Click Yes to open the IRC.
Click No to return to the login interface.
Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the
CA certificate is imported, the security risk dialog box will no longer be
displayed.
10.10.1.104 (IP address of the destination server node or
Copyright © Huawei Technologies Co., Ltd.
12 Common Operations
Figure 12-23.
Figure 12-24.
100