Logging In To The Cli Using Putty Over A Network Port - Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide

10.4.1 Logging In to the CLI Using PuTTY over a Network Port

Scenarios
Use PuTTY to access a server over a local area network (LAN).
Procedure
Step 1 Set an IP address and subnet mask or add route information for the PC to
communicate with the server.
Step 2 On the PC, double-click PuTTY.exe.
The PuTTY Configuration window is displayed.
Step 3 In the navigation tree, choose Connection > SSH.
Step 4 Set the login parameters.
The parameters are described as follows:
●
●
●
Step 5 In the navigation tree, choose Session.
Step 6 Select SSH under Connection type.
Issue 07 (2019-12-20)
● You can obtain the PuTTY software from the chiark home page.
● You are advised to use PuTTY of the latest version. PuTTY of an earlier version may
cause login failures.
Host Name (or IP address): Enter the IP address of the server to be accessed,
for example, 191.100.34.32.
Port: Retain the default value 22.
Connection type: Retain the default value SSH.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
118